GE Monogram ZIK30GNHII Spezifikationen PDF herunterladen

Listed by

Underwriters

Laboratories

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

MONOGRAM 30" FULLY INTEGRATED CUSTOMIZABLE

REFRIGERATORS FOR DUAL INSTALLATION

ZIC30GNHII/

ZIK30GNHII

Product Speciﬁcation Revised 7/16

The Installation Space

The ﬁnished cutout width must be 30".

The cutout depth must be 25" for ﬂush installations.

- The front face of the refrigerator ﬁts ﬂush with 25" depth

adjacent cabinets.

Electrical

A 115V, 60Hz., 15 or 20 amp power supply is required. An

individual properly grounded branch circuit or circuit breaker

is recommended. Install a properly grounded 3-prong electrical

receptacle recessed into the back wall. Electrical must be located

on rear wall as shown.

Note: GFI (ground fault interrupter) is not recommended.

Height options

80” or * 84“

25” min. depth

30” Finished Width

Height adjustable

from 79-3/8” to 80-3/8” *

3/4”

23-3/4”

29-3/4”

1/8”

1-1/4”

4”

3-1/8”

60" Finished Width

Wall

View

84"

max

80"

min

Finished

Opening

25" min. Cutout

Depth

77"

Anti-tip location do not obstruct

Water Tube & Electrical Outlet

Water Line

- A cold water supply is required for automatic

icemaker operation. The water pressure must be

between 40 and 120 p.s.i.

- Route 1/4" OD copper or GE SmartConnect

™

plastic

tubing between the house cold water line and the

water connection location.

- Tubing should be long enough to extend to the

front of the refrigerator. Allow enough tubing to

accommodate a bend leading into the water line

connection.

- Water line can enter an opening through the floor or

back wall.

- Install a shut-off valve between the icemaker water

valve and cold water supply in the home.

Note: When two units are placed side

by side, order heater kit ZUG30.

1 2 3 4 5 6 7 8 9